Title | : | SEMINA E RULLATURA FRUMENTO DURO | DEUTZ-FAHR 5120 + GASPARDO SL300 | DEUTZ-FAHR AGROCLIMBER + MAP |
Duration | : | 14:55 |
Viewed | : | 0 |
Published | : | 20-12-2020 |
Source | : | Youtube |
Buona domenica amici e ben ritrovati qui sul mio canale con questo nuovo video.
Dopo la preparazione terreno con fresatura che avete visto nello scorso video col deutz AGROTRON 7230 ttv, in questo video nello stesso appezzamento andremo a seminare frumento duro sempre con un mezzo targato Deutz-Fahr. Questa volta però non un deutz tedesco, ma bensì un deutz italiano che in pratica è un Same colorato di verde.
Trattore che infatti è stato prodotto nello stabilimento italiano della Same, a Treviglio (BG), dal 2013 al 2017, uno stabilimento che io ho avuto il piacere di visitare dal vivo.
Trattore spinto da un piccolo propulsore DEUTZ TCD L04 da 3,6 litri che eroga una potenza massima di 116 cv a 2200 rpm.
Equipaggiato con un Powershift parziale con 60 marce suddivise in cinque marce in quattro gamme e con 3 marce Powershift sottocarico.
La seminatrice è una Gaspardo SL300 da 3 metri con gancio traino apribile che permette l'aggancio della macchina ad un trattore cingolato. In questo caso il gancio è richiuso perché la seminatrice viene agganciata ad un gommato.
Il cingolato è un Deutz-Fahr AgroClimber 400f praticamente anche lui è un Same camuffato Deutz-Fahr, perché è praticamente identico al Same Kripton 100f.
Cingolato spinto da un motore SDF 4.0 CC turbocompresso che arriva a sviluppare 100 cv massimi.
Equipaggiato con una trasmissione meccanica 16/16.
Cingolatura standard a 5 rulli con pattini da 40 (400mm).
Come vedrete il cingolo verrà impiegato per il lavoro di rullatura dopo la semina e verrà abbinato ad un rullo MAP dalla larghezza di 4,60 metri.
La descrizione è conclusa quindi io saluto 👋 e ringrazio Egidio driver dei 2 mezzi, per la sua disponibilità alle riprese e inoltre saluto ringrazio anche Simone, il proprietario del terreno.
Buona visione e a presto! ;)
(ENG):
Happy Sunday friends and welcome back here on my channel with this new video. After the soil preparation with milling that you saw in the last video with the deutz AGROTRON 7230 ttv, in this video in the same plot we will go to sow durum wheat always with a Deutz-Fahr vehicle. This time, however, not a German deutz, but an Italian deutz which is basically a green colored Same. This tractor was produced in the Italian Same factory in Treviglio (BG) from 2013 to 2017, a factory that I had the pleasure of visiting live. Tractor powered by a small DEUTZ TCD L04 engine, displacement 3,6 liters, that delivers a maximum power of 116 hp at 2200 rpm. Equipped with a partial Powershift with 60 gears divided into five gears in four ranges and with 3 Powershift gears under load. The seeder is a 3-meter Gaspardo SL300 with opening tow hook that allows the machine to be coupled to a crawler tractor. In this case the hook is closed again because the seeder is hooked to a rubber tire. The crawler is a Deutz-Fahr AgroClimber 400f practically also a Same disguised Deutz-Fahr, because it is practically identical to the Same Kripton 100f. Tracked powered by a 4000 cc SDF engine which in this case, however, reaches a maximum of 100 hp. Equipped with a 16/16 mechanical transmission. Standard 5-roller track with 40 (400mm) shoes. As you will see, the track will be used for the rolling work after sowing and will be combined with a MAP roller with a width of 4.60 meters. The description is concluded so I greet 👋 and I thank Egidio driver of the 2 vehicles, for his availability for filming and I also greet Simone, the land owner. Enjoy and see you soon! ;)
SHARE TO YOUR FRIENDS
Scan me